-
Light weight and short form design can reduce the spindle loading for vertical lathe application.
Built-in check valve and proximity switch brackets. In case of power failure occur which prevents the workpiece from flying out.
Developed for rear locking installation.
Can be installed with air function.
Thank you for visiting our website. Your personal privacy is absolutely respected and protected by the website. To help you understand how the website collects, uses and protects your personal information, be sure to read the websitePrivacy Policy. Thank you!
MRA
Short type non through-hole rotary hydraulic cylinder with central bore for air
Drawings
Specifications
| SPEC Model | Piston Dia. (mm) | Piston Area (cm2) Push Side / Pull Side | Max. Draw Bar Force KN(kgf) Push Side / Pull Side | Piston Stroke (mm) | Max. Operating Pressure MPa (kgf / cm2) | Max. Speed (r.p.m.) | Moment Of Inertia I (kg‧m2 ) | Weight (kg) | Total Leakage L/min |
|---|---|---|---|---|---|---|---|---|---|
| MRA12535 | 125 | 116 / 107.5 | 48.5(4945)/45(4588) | 35 | 4.5(45.9) | 6000 | 0.028 | 9.3 | 0.8 |
| MRA15035 | 150 | 170.2 / 156.7 | 71.6(7301)/66(6730) | 35 | 4.5(45.9) | 5500 | 0.043 | 12.8 | 0.8 |