-
Light weight and short form design can reduce the spindle loading for vertical lathe application.
Built-in check valve and proximity switch brackets. In case of power failure occur which prevents the workpiece from flying out.
Developed for rear locking installation
Central bore for coolant, air with thread rotary union.
Thank you for visiting our website. Your personal privacy is absolutely respected and protected by the website. To help you understand how the website collects, uses and protects your personal information, be sure to read the websitePrivacy Policy. Thank you!
MRR
Short type non through-hole rotary hydraulic cylinder (for rotary union)
Drawings
Specifications
| SPEC Model | Piston Dia. (mm) | Piston Area (cm2) Push Side / Pull Side | Max. Draw Bar Force KN(kgf) Push Side / Pull Side | Piston Stroke (mm) | Max. Operating Pressure MPa (kgf / cm2) | Max. Speed (r.p.m.) | Moment Of Inertia I (kg‧m2 ) | Weight (kg) | Total Leakage L/min |
|---|---|---|---|---|---|---|---|---|---|
| MRR12535 | 125 | 113 / 107.5 | 47.3(4823)/45(4588) | 35 | 4.5(45.9) | 6000 | 0.027 | 9.8 | 0.8 |
| MRR15035 | 150 | 168.7 / 156.7 | 71(7240) / 66(6730) | 35 | 4.5(45.9) | 5500 | 0.055 | 13.5 | 0.8 |